8/16 PORT STANDALONE DVR WEB VIEWER
Please make sure that your pop-ups blocker is off or disable and port 6100 is properly open/forwarded from your router/modem.

Port forwarding ISP/Telco Instructions (PDF)

8/16 Port Standalone DVR Manual (PDF)


In order to view your live Standalone DVR, your internet explorer might need the following adjustment. Please follow the instructions below:
 
1. In the tool bar at the top of the page, click on "Tools." and then  click on "Internet Options" from the list
2. Click on "Security" tab  and then click on "Trusted Sites"
3.  click on "Sites...." This will open a screen which displays your "Trusted Sites" settings. Uncheck the box on the bottom of the screen which says, "Require server verification (https:) for all sites in this zone." 
4.  add the address "SDVR.CCTVbuyers.com" where it says, "Add this web site to the zone" and click on "Add." 
5. click "OK or Close"  and then "OK" again and return to Internet Explorer. 


Once you have done the above steps click on the link below "VIEW MY DVR". You may be prompted to download and install a file/small program for the ActiveX.

When LOGIN box appears type in your IP address, Port, ID and Password.

IP: Your Static IP address provided by your ISP

Default Port is 6100 unless you changed your port

Default ID is ADMIN must be in upper case

Default Password is 1234 unless you changed your password

VIEW MY DVR

Please make sure that your pop-ups blocker is off or disable and port 6100 is properly open/forwarded from your router/modem.